Person Reader Configuration and Testing Checklist
Here’s a consolidated installation checklist for Person Readers
Configuration
- Verify all Person Readers are configured for:
- Appearance recognition
- Voice command and control
- Depth enabled (to prevent hallucinations)
- Maturity setting turned on
- Confirm recognition minimum threshold is set to 0.45 (per Niels).
- Ensure detection is calibrated to 5 feet / 1,500 mm.
- Confirm latest Person Reader software is installed across all devices.
Learning & Sync
- Verify learning is enabled: enrollment at one reader syncs immediately to all others.
- Confirm all Person Readers are generating both local and global centroids.
- Test enrollment with cards at each Person Reader to validate synchronization.
Face Scrub
- Confirm FaceScrub runs nightly across all Person Readers. (Varma to verify)
AutoID Pipeline
- Verify AutoID is enabled and functional.
- Confirm IDs are being ingested into BluSKY.
- Ensure nightly improvement of AutoID records is occurring.
- Check that AutoID images appear in the timeline (not photo ID images).
- Validate that FaceScrub pipeline is running and replacing legacy images.
Personnel Records & Floor Assignments
- Review ALL personnel records to confirm floor associations.
- Check for default floor assignments for each person.
- Verify distribution of people across companies/floors is correct (coordinate with Austin Upton).
- Ensure no bunching of personnel on incorrect floors.
- Confirm floors are correctly configured to support automatic elevator assignment.
AI & Floor Learning
- Verify AI pipelines and cubes are enabled and operational.
- Confirm AI is correctly selecting default floors based on behavior/input.
- Enable AI-driven default floor detection where possible.
- Validate floor learning is turned on and functioning.
Testing & Validation
- Test facial recognition at every Person Reader.
- Validate opt-in/opt-out capability via voice command.
- Confirm operation both locally and in the cloud.