Skip to main content




Input are simple electrical circuits that provide information to the access control system. Inputs can range from a simple door contact to high tech zone motion detection.

Search Criteria

The Input List is almost always massive in size. We recommend using the Search Fields to save time.

Name Description
AC System This field limits search results to a specific Access Control System
Controller This field limits search results to a specific Controller
SIO Board This field limits search results to a specific SIO Board
Search Text This field is used to limit the number of rows listed in the list box below. To use simply type a string of characters or words. Please note you will only see those items you have the permission and access rights for. It is a good idea to search first, even when you are creating a new entry.
View View will bring you to the view screen. Use this to look up information on existing entities and access Audit Info.
Submit This button performs a search based on the criteria selected in the filter.
Reset This button clears all fields in order to start a new search.

List Definitions

Name Description
Name The name of the Input
Input Number The corresponding numbered input on the SIO Board or Controller
Debounce This setting gives a small bit of time to make a complete circuit again.  Typically used to wait for a door to stop moving when shut.
Hold Time The number of seconds to hold a higher priority status before a lower priority status is reported. The recommend setting is 2 through 15.Typically used to delay a motion detector from trigger to fast, wait for a longer signal before triggering.
Deleted If checked, entry is deleted from BluSKY.
SIO Board The SIO Board or Controller the Input is connected to.

Input Setup Actions

  • Was this article helpful?