Skip to main content
BluINFO

Useful Linux Commands for BluB0X Remote Servers

  1. Last updated
  2. Save as PDF

Overview

This article is intended to help our customers and integrators that are Windows centric understand the commands to run in Linux.
Commands
  • Start/Stop services - https://www.techrepublic.com/article/how-to-start-stop-and-restart-services-in-linux/

  • Stop Service: sudo systemctl stop Blub0x_LocalSync.service

  • Start Service: sudo systemctl start Blub0x_LocalSync.service

  • Start Service: sudo systemctl stop  MitsubishiInterface.service

  • Stop Service: sudo systemctl start MitsubishiInterface.service

  • Start Service: sudo systemctl stop  TKEinterface.service

  • Stop Service: sudo systemctl start TKEInterface.service

  • Status of OtisInterface: sudo systemctl status OtisInterface.service

  • Disable Otis Interface: sudo systemctl disable OtisInterface.service

  • Look at Local Sync Logs: sudo journalctl -f -u Blub0x_LocalSync.service

  • Get status of services: sudo systemctl status Blub0x_LocalSync.service

Example:

blub0x@787-7th-lnx-dds1:~$ !301

sudo systemctl status Blub0x_LocalSync.service

● Blub0x_LocalSync.service - Blub0X LocalSync Service

     Loaded: loaded (/etc/systemd/system/Blub0x_LocalSync.service; enabled; vendor preset: enabled)

     Active: active (running) since Tue 2021-04-13 07:01:17 EDT; 20min ago

   Main PID: 21541 (mono)

      Tasks: 16 (limit: 9352)

     Memory: 65.9M

     CGroup: /system.slice/Blub0x_LocalSync.service

             └─21541 /usr/bin/mono /usr/lib/mono/4.5/mono-service.exe -l:/tmp/localsync-lock /home/blub0x/Desktop/Linux DDE/Blub0x_LocalSync/Blub0x_LocalSync.exe

 

Apr 13 07:21:42 787-7th-lnx-dds1 mono[21541]: INFO: 4/13/2021 7:21:42 AM: TaskBase.ExecuteTask(64) -- DataChangesUploadTask -- task execution finished

Apr 13 07:21:47 787-7th-lnx-dds1 mono[21541]: INFO: 4/13/2021 7:21:47 AM: TaskBase.ExecuteTask(50) -- DataChangesUploadTask -- task execution started

Apr 13 07:21:48 787-7th-lnx-dds1 mono[21541]: INFO: 4/13/2021 7:21:48 AM: TaskBase.ExecuteTask(64) -- DataChangesUploadTask -- task execution finished

Apr 13 07:21:53 787-7th-lnx-dds1 mono[21541]: INFO: 4/13/2021 7:21:53 AM: TaskBase.ExecuteTask(50) -- DataChangesUploadTask -- task execution started

Apr 13 07:21:53 787-7th-lnx-dds1 mono[21541]: INFO: 4/13/2021 7:21:53 AM: TaskBase.ExecuteTask(64) -- DataChangesUploadTask -- task execution finished

Apr 13 07:21:58 787-7th-lnx-dds1 mono[21541]: INFO: 4/13/2021 7:21:58 AM: TaskBase.ExecuteTask(50) -- DataChangesUploadTask -- task execution started

Apr 13 07:21:58 787-7th-lnx-dds1 mono[21541]: INFO: 4/13/2021 7:21:58 AM: TaskBase.ExecuteTask(64) -- DataChangesUploadTask -- task execution finished

Apr 13 07:22:03 787-7th-lnx-dds1 mono[21541]: INFO: 4/13/2021 7:22:03 AM: TaskBase.ExecuteTask(50) -- DataChangesUploadTask -- task execution started

Apr 13 07:22:03 787-7th-lnx-dds1 mono[21541]: INFO: 4/13/2021 7:22:03 AM: TaskBase.ExecuteTask(64) -- DataChangesUploadTask -- task execution finished

Apr 13 07:22:08 787-7th-lnx-dds1 mono[21541]: INFO: 4/13/2021 7:22:08 AM: TaskBase.ExecuteTask(50) -- DataChangesUploadTask -- task execution started

 

DDE

Stop Service: sudo systemctl stop Blub0x_LocalSync.service

Check the service to see if there are errors: sudo journalctl -fu TKEInterface.service

Stop TKE Interface: blub0x@tkelnx-dde:~$ sudo systemctl stop TKEInterface.service 

 

DDE Issues:

  • If you see "Mar 14 11:12:17 tkelnx-dde mono[5058]: /home/blub0x/BluB0X_TKEInterface/TKEInterface.exe: Lock file already exists: /tmp/TKEInterface.exe.lock" You will need to stop the service, remove the lock, then start the service.
    • blub0x@tkelnx-dde:~$ cd /tmp
    • blub0x@tkelnx-dde:/tmp$ ls
      • Blub0x_LocalSync.exe.lock
    • $ sudo rm TKEInterface.exe.lock
    • $ sudo systemctl start TKEInterface.service 
    • $ sudo journalctl -fu TKEInterface.service - Make sure the service is running without errors.
       

Instructions 

  1. Log in and navigate to #. Main Menu->
  2. Use the BluCreateBtn.png button in the lower left side to create a new #.
  3. When finished use the saveBtn.png button to finish.