Edit a Floor Stop
BluSKY URL: https://blusky.blub0x.com/en-US/FloorStopMercury
Overview
A Floor Stop is a combination of an elevator, elevator door and floor, that is controlled by BluSKY. The management of Floor Stops is handled in a way very similar to a Portal. This article provides instruction on how to edit existing Floor Stops and should be used only to adjust the configuration.
Edit a Mercury Floor Stop's Name
- Log in and navigate to Floor Stops. Main Menu-> Setup-> System Setup-> Floor Stop
- Select the entry you wish to edit from the list.
- Click the
icon in the lower left side of the screen. - Note: If the edit icon is not available ensure that only one entry has been highlighted.
- Use the Name text field to enter the new name of the Floor Stop.
- Confirm changes with the
button.
Edit a Mercury Floor Stop's Output
- Log in and navigate to Floor Stops. Main Menu-> Setup-> System Setup-> Floor Stop
- Select the entry you wish to edit from the list.
- Click the icon in the lower left side of the screen.
- Note: If the edit icon is not available ensure that only one entry has been highlighted.
- Click
to display additional options. - Use the Output drop down menu to select the correct Output.
- Confirm changes with the button.
Edit a Mercury Floor Stop's Input
- Log in and navigate to Floor Stops. Main Menu-> Setup-> System Setup-> Floor Stop
- Select the entry you wish to edit from the list.
- Click the icon in the lower left side of the screen.
- Note: If the edit icon is not available ensure that only one entry has been highlighted.
- Click to display additional options.
- Use the Input drop down menu to select the correct Input.
- Confirm changes with the button.