Skip to main content
BluINFO

Mercury MR51e & MR62e Serial I/O Controllers

MR51e

Mercury’s MR51e & MR62e SIO Access Platform is a network connected, single-door, POE capable interface panel that provides an ideal integration solution when a network connection to the door is desired.

Two reader ports support separate in/out readers of all types and technologies, including Wiegand, clock and data, magnetic stripe, F/2F, Supervised F/2F, keypads, LCD and biometrics. Auto-addressable and directly managed by the Mercury intelligent controllers, the MR51e & MR62e SIO are capable of elaborate processes and procedures without host intervention

Application Notes

Built on the Mercury Access Platform, the MR51e & MR62e SIO will relate the activities of selected system devices to other devices within the system, generating actions and allowing activities to transpire independently of the host. The MR51e’s support of paired readers enhances the ability to meet installation challenges, such as placing readers at varying heights or distances to accommodate ingress and egress of handicapped, vehicle and/or foot traffic. These readers can be logically linked together, yet function independently when access identification is presented to either one. When access rights are granted the same relay will function as programmed to unlock the opening

MR51e

Features
  1. Multi-facility code support
  2. Multi-reader technology support
  3. PoE enabled
  4. Auto-addressable
  5. AES 128 bit data encryption
  6. UL 294 and UL 294B Recognized
  7. OSDP support
  8. Universal I/O device characterization
  9. IP-to-the-Door
  10. Security and Network
  11. Card Reader Functions
  12. Open Architecture
  13. IP-to-the-Door
  14. OSDP Protocol
  15. Enhanced Security
  16. Versatile Interoperability
Benefits
  1. Economical
  2. Network enabled and web configured, providing greater flexibility to installers
  3. Highly adaptable to a variety of sensors and reader technologies
  4. Supports Wiegand, clock and data, magnetic stripe, F/2F, Supervised F/2F, keypads, LCD and biometrics
  5. IPv4/

  6. Intelligent controller to 62e communications protected by TLS 1.2/1.1 or AES-256/128

  7. Generate and load custom peer certificates for TLS

  8. FIPS 140-2 user of OpenSSL

  9. Port-based network access control using 802.1X

  10. Zerconf Device Discovery (mDNS)

  11. Edge-capable input/output module supporting PoE+ power

  12. Provides up to 1.5 A of power at door for reader, lock and more
  13. OSDP Readers Only

  14. Supports multiple card formats, paired and alternate readers, elevator, turnstile and biometric devices

  15. Anti-passback support (area, reader and time based)

  16. Programmable keypad user commands

  17. High performance, reliable platform enables use of hardware with Mercury OEM partners’ software solutions
  18. Supports PoE+ power, removing the cost of traditional power supplies and homerun wiring
  19. Supports OSDP and Secure Channel communications
  20. Embedded crypto memory chip provides secured layer of encryption to protect sensitive data
  21. Same reliable interface and identical footprint as the Series 2 Mercury IO modules, enabling seamless upgrades for existing deployments

System Diagram

Mercury Service Map


Specifications

The interface is for use in low voltage, class 2 circuits only.

Power Input:
PoE Power Input 12.95W, compliant to IEEE 802.3af – OR --10 – 14VDC Power Supply

Power Output:
12VDC @ 700mA including reader andAUX output
Outputs:
Form-C contacts: K1, K2: 5A @ 30Vdc
Inputs:
4 supervised, End of Line resistors, 1k/1k ohm, 1% 1/4W watt standard

Reader Power:12 VDC ±10% (PTC limited 180mA max)

Reader LED Output: 12 Vdc±10% (PTC limited 180mA max)
Buzzer Output: Open collector, 5VDC open circuit max 10mA sink maximum

Reader Data Inputs: TTL compatible inputs or 2-wire RS-485

Communication: Ethernet, 10Base-T/100Base-TX

Cable Requirements: Ethernet, 10Base-T/100Base-TX

Alarm Inputs: 
1 twisted pair per input, 30-ohm maximum

Reader Data (TTL): 18AWG, 6 conductors, 500-foot (150 m) maximum

Reader Data: 
(RS-485): 24AWG, 120-ohm impedance, twisted pair with shield, 2000- foot (1,219 m) maximum

Dimensions: 5.5” (140mm)W x 2.75”(70mm)
Weight: 4.2 oz. (120g) without bracket

Temperature:0-70°C operational, -55-85°C storage

Humidity:0-95% RHNC

Standards: UL 294 and UL 294B Recognized, CE Compliant, ROHS, FCC Part 15 Class A, NIST Certified Encryption

Ordering Information:

MFG Part # BluBØX Order # Description
MR51e 120-2400 Mercury - MR51e One Door Controller Ethernet PoE/12V
 MR62e XXXX Mercury - MR51e One Door Controller Ethernet PoE/12V

  • Was this article helpful?