Skip to main content
BluINFO

Mercury MR50 Serial I/O Controller

MR50

Authentic Mercury MR serial Input/output (SIO) devices represent the secondary level in Mercury’s distributed architecture. The devices provide flexibility ensuring they can choose the controller that best fits their needs.

The MR50 is an economical single card reader interface panel dedicated to individual door oversight and provides of all the I/O needed for controlling a single door. Each MR50 connects one card reader, two general-purpose input monitor points and two control relays for access control and security monitoring through an Authentic Mercury EP intelligent controller.

The panel is easy to install and supports Wiegand, clock and data, magnetic stripe, F2F, Supervised F2F, OSDP, keypad and biometrics reader technologies. With its compact footprint and RS-485 connectivity, the MR50 can be clustered or distributed depending on the installation environment.

An ideal choice for a compact and economical single-card reader panel, the high-performance MR50 is a versatile, reliable interface for an individual door

Application Notes

The inputs and the relays can be assigned to door-related functions or to general purpose I/O. The inputs support normally open, normally closed, supervised and non-supervised circuits. The relays can be configured for fail-safe or fail secure operation.

Hardware interface and card format settings are loaded through software commands.

When connected to a Mercury EP intelligent controller, the MR50 can relate the activities of selected system devices to other devices within the system, generating actions and allowing activities to occur independent of the host. The MR50 can also locally process access requests based on facility code verification, even disconnected from an intelligent controller. Up to eight facility codes may be active in each MR50.

MR50

Features
  1. Multi-facility code and reader technology support
  2. AES 128 bit data encryption
  3. UL 294 Recognized
  4. Universal I/O device characterization
Benefits
  1. Easily connects to Mercury’s intelligent controllers
  2. Provides all I/O needed for single door control
  3. Small footprint for versatility
  4. Supports Wiegand, clock and data, magnetic stripe, F2F, Supervised F2F, OSDP, keypad and biometrics reader technologies

System Diagram

Mercury Service Map


Specifications

Electrical
Primary Power:
  1. 12-24 VDC +/- 10%, 500mA maximum
  2. 150mA maximum
  3. 12Vdc @ 110mA nominal
  4. 24Vdc @ 60mA nominal

Communications: 
RS–485, 2-wire, 4,000’
(twisted pair with shield, Belden 9841)

Reader Port:
1 Power: Input voltage pass- through Data Card/Keypad
Clock/Data, Data–1/Data–0, or RS-485

LED:
Two-wire or one-wire bicolor support 

Buzzer:
Only with one-wire LED 

Inputs:
  1. 2 general-purpose: Programmable circuit type
  2. One dedicated (tamper)

Output Relays:

  1. Relay 1: Form–C, 5 Amp 30 Vdc
  2. Relay 2: Form–C, 1 Amp 30 Vdc

Dimensions:
2.75” L x 4.25” W x 1.0” H, (70mm L x 108mm W x 25.4mm H)

Temperature:
-40—75 °C operational, -55—85 °C storage 

Humidity:
0-95% RHNC 

Standards: 

  1. UL294 recognized
  2. CE compliant
  3. RoHS

Ordering Information:

MFG Part # BluBØX Order # Description
MR50 120-2300 Mercury - MR50 One Door Controller 12/24VDC

Additional Resources

  • Was this article helpful?