Skip to main content
BluINFO

Edit a Procedure

BluSKY URL: https://blusky.blub0x.com/en-US/MercuryProcedure

Overview

Procedures combine one or more pre-defined Commands with a Trigger. This article provides detailed instructions to assist with making edits to a Procedure.

Edit a Procedure's Name

  1. Log in and navigate to Procedures. Main Menu-> Setup-> System Setup-> Procedures
  2. Use the search feature find, then select the entry you wish to edit from the list.
  3. Click the  icon in the lower left side of the screen.
    • Note: If the edit button is not available ensure that only one entry has been highlighted.
  4. Use the Name text field to enter the new name of the procedure.
  5. Confirm changes with the saveBtn.png button.

Edit a Procedure's Commands

  1. Log in and navigate to Procedures. Main Menu-> Setup-> System Setup-> Procedures
  2. Use the search feature find, then select the entry you wish to edit from the list.
  3. Click the  icon in the lower left side of the screen.
    • Note: If the edit button is not available ensure that only one entry has been highlighted.
  4. Add or Remove the Commands to the Procedure, by selecting the Command and using the Assign Command button  to assign the command or the Unassign Command  button to remove the command.
  5. Confirm changes with the saveBtn.png button
  • Was this article helpful?