Skip to main content

Monitoring Point Mode



Monitoring Point have three different modes of operation. These modes allow for a highly customizable system that can be configured for very specific behavior. Please use the table below to better understand some of the ways you can customize how a Monitoring Point behaves.
Name Description
Normal Mode Using Normal Mode will disable the ability to set a Entry Delay or Exit Delay
Latching This mode will cause an Alarm Event regardless if the Input is deactivated
Non-Latching The mode will allow for an Input to be activated and then closed again without causing an Alarm Event. The length of time the Input is activated before it alarms is set by the Entry Delay
  • Was this article helpful?