Skip to main content
BluINFO

Edit a Control Point

  1. Last updated
  2. Save as PDF

BluSKY URL: https://blusky.blub0x.com/en-US/MercuryControlPoint

Overview

Control Points are used to configure Outputs to provide feedback to the Controller. This article will provide detailed instruction on how to edit an existing Control Point.

Edit a Control Point's Name

  1. Log in and navigate to Control Point. Main Menu-> Setup-> System Setup-> Control Point
  2. Select the entry you wish to edit from the list.
  3. Click the editButtonNoText.png icon in the lower left side of the screen.
    • Note: If the edit button is not available ensure that only one entry has been highlighted.
  4. Use the Name text field to enter the new name for the Control Point.

  nameField.png

  1. Confirm changes with the saveBtn.png button.

Edit a Control Point's Default Pulse

  1. Log in and navigate to Control Point. Main Menu-> Setup-> System Setup-> Control Point
  2. Select the entry you wish to edit from the list.
  3. Click the editButtonNoText.png icon in the lower left side of the screen.
    • Note: If the edit button is not available ensure that only one entry has been highlighted.
  4. Use the Default Pulse Seconds to enter the corrected time in seconds the Output should be active.

  defaultPulseSec.png

  1. Confirm changes with the saveBtn.png button.

Edit a Control Point's Output

  1. Log in and navigate to Control Point. Main Menu-> Setup-> System Setup-> Control Point
  2. Select the entry you wish to edit from the list.
  3. Click the editButtonNoText.png icon in the lower left side of the screen.
    • Note: If the edit button is not available ensure that only one entry has been highlighted.
  4. Use the Output drop down menu to select the correct Output.

 selectOutput.png

  1. Confirm changes with the saveBtn.png button.
  1. Back to top
  • Was this article helpful?

Recommended articles

  1. Article type
    How-To
    Stage
    Review
  2. Tags
    1. Control Point
    2. Edit