Skip to main content
BluINFO

Integrator Create

BluSKY URL: https://blusky.blub0x.com/en-US/Integrator/Create

Overview

This article will cover how to create an integrator in the BluSky System.

Integrator Definitions

 

Name Description
Integrator Name Type the name of the integrator being created.  The name must be unique
Integrator Number  

Integrator Address Definitions

 

Name Description
Address 1 The address of the Integrator, User, or Company.
Address 2 An additional address field for lengthy or complex addresses.
City The City.
Postal Code The postal code for the record.
Country The country.
Region The Region, i.e. State, Province, County, etc.
Website The integrators website
Map Select "get from address above", show a map of the integrators location

Integrator Contact Info Definitions

 

Name Description
Email Address Main email address for the integrator
Add Phone Main phone number for the integrator

Directions

Add Integrator

  1. Input the integrators name in to the "Integrators Name" field.
  2. Input the Integrators number, if known, into the "Integrators Number" field.

​Add Address

  1. Fill in "Address 1", ex. 100 Lincoln Ave
  2. Fill in "Address 2"  ex. Floor 2, office 100
  3. Fill in "City".  
  4. Fill in "Postal Code" 
  5. Fill in the "Country Code"
  6. Fill in the "Region"
  7. Fill in the website.
  8. Select "get from address above" to have the map location of the integrator updated.

Add Contact Info

  1. Add Email Address
    1. ​Select Plus Sign.pngbutton to open up selection.
    2. Go to Please Select.pngand right click on the down arrow to select the type of email address to be used.
    3. Fill in the field to the right of your selection with the email address.
      1. Select default button to make this the default email address. You can do this for only one selection.
    4. If you need to add additional email address's go back to step 1 until you have added all the email addresses necessary.
      1. If you want to remove an address then select the Minus Sign.png
  2. Add Phone
    1. Select Plus Sign.pngbutton to open up selection.
    2. Go to Please Select.pngand right click on the down arrow to select the type of phone to be used.
    3. Fill in the field to the right of your selection with the phone number.
    4. Select default button to make this the default phone address.
    5. If you need to add additional phone numbers go back to step 1 until you have added all the phone numbers necessary.
      1. If you want to remove a phone number then select the Minus Sign.png
  • Was this article helpful?