Lock Power Boards
Overview
Power controller modules provide 4 or 8 relay controlled, protected outputs and 4 or 8 access control inputs. When used in a single voltage system, each individual output may be programmed for a continuous output or to respond to the input from the access control system. A fire alarm interface to over ride the access control system for control of egress locks is provided for each output.
The C4 and C8 power controller modules provide 4 or 8 relay controlled, protected outputs and 4 or 8 access control inputs. When used in a single voltage system, each individual output may be programmed for a continuous output or to respond to the input from the access control system. When used in a dual voltage system, each individual output zone may be programmed to operate with either of the two system voltages.
Features 
- Listed for Fire Alarm, Intrusion, Access Control, CCTV and Mass Notification
- Provides 4 or 8 trigger input zones for interface to an access control system
- Provides 4 or 8 relay controlled output zones
- Accommodates failsafe or failsecure locking devices
- Provides fire alarm interface for egress lock control
- Monitors fuse integrity of output zones and reports fault to host power supply
- Status LEDs report zone activity
- Each output zone is fused at 3A or 2.5A for PTC circuit breakers
- PTC versions are low voltage, Class 2 power limited
- Allow selection by zone from two voltage sources