Skip to main content

How to Configure a QScan Bar Code Reader


Directions on how to program your Qscan bar-code reader to read bar-codes  send by BluB0X.


  1. Download and print the Qscan Bar Code configuration bar code Configure BluB0X Bar Code for 26 BIt Cards for QScan Readers.pdf
    1. Make sure the bar code is at least 6 inched long.  If it is printed too small the scanner will not read it.
  2. Scan the 1st and 2nd barcodes in the PDF.
  3. Scan the bar code in front of the Qscan reader.  You should hear a success beep when read.


  • Was this article helpful?