BluCHIP 1502-8R/32I/28O-E4M1LPM (752-7202)
BluCHIP 1502 Eight Reader/Thirty-Two Input/Twenty-Eight Output w/ Managed Lock Power and Power Management for Eight Doors
The BluCHIP 1502-8R/32I/28O-E4M1LPM is a unified 8 Reader/32 Input/28 Output kit with Managed Lock Power and Power & Management for Eight (8) Doors. The kit is configured with space to add a backup battery and utilizes an FPO power supply to generate 24VDC and a B100 to generate 12VDC. It includes one (1) LP1502, three (3) MR52-S3 boards, a locking eight-door enclosure with tamper switch, a power supply and a speed wiring kit. Locally managed lock power and power monitoring & control are included. Remote management and reporting of power supply and battery health are available through BluSKY Power Diagnostics.
Click to view: 752-7202.pdf
System Features
FPO offline power supply
- 120 or 230 VAC input
- 12 and 24 VDC outputs
- On board Fire Alarm Interface
- Continuous and resettable DC
Distributed output module
- Four, controlled fused at 3A each
- Eight, auxiliary Class II P limited at 2.5A each
Expansion options
- Increased power, multiple voltages
- Additional distribution outputs
- Power management
Enclosure Features
Labor-saving design
- Unified power and security in one enclosure
- Pre-wired power section
- Removable back plate simplifies installations
- Speed kit is included for power and data wiring
- Includes mounting studs on door to add additional I/O boards
Additional benefits
- Wire management room
- 4.5” enclosure depth fits battery set
- Tamper switch, lock, dual key set standard
- Mounting hardware for access boards included
Specifications
- Input 120/230VAC 50/60Hz | 200 Watts
- Overload and short circuit protection
- Over temperature protection
- Polarized AC power supply disconnect
- 150W Total Output Power | 12VDC/6A or 24VDC/3A
- 5-18VDC @ 4A Max. | FPO Board Outputs: Continuous (DC1), Resettable (DC2)
- 8 Auxiliary Outputs, 8 Managed Outputs, Class 2 PL @ 2.5A each
- 120mV Output Voltage Ripple | System Efficiency: 88% | System BTU Rating: 66 BTU/Hr
- Independent built-in 2A (FPO150) Charger for sealed lead-acid or gel type batteries
- Microprocessor dual rate charging of 12 or 24V battery sets
- Automatic switchover to standby battery when AC fails
- Zero voltage drop when switched over to battery backup
- UL294, UL603, UL864, UL1076, UL1481, UL2044, UL2572, ULC S318, ULC S319, ULC S527, CSA C22.2 #107.1, FCC Part 15, CSFM Approved
- (1) LP1502, (3) MR52-S3
- 8 Readers | 32 Inputs | 28 Outputs
- 24.00”H x 16.00”W x 4.50”D | 42 lbs.
Recommended board layout
The LSP NL4 is installed directly over the LSP B100 with included 6-32 x 1.25” standoffs and right angle Ethernet adapter.
Kit Includes
| MFG Part # | BluBØX Order # | QTY | Description |
|---|---|---|---|
| LP1502 | 120-1101 | 1 | Mercury LP1502: Two door DB controller Ethernet 12/24VDC Auxiliary I/O |
| MR52-S3 | 120-2501 | 3 | Mercury MR52-S3: Two door controller & auxiliary I/O 12/24VDC |
| E4ML-SK-4T | 577-3040 | 1 | BluBØX E4ML-SK-4T Speed Kit: Four board precut DC power, RS485 and lock trigger wiring kit |
| FPO150-B100M8PD8PNL4E4M1-NLKIT | 670-1463 | 1 | LifeSafety Power: Eight door power supply w/ power distribution and management, includes enclosure |
Ordering Information
| BluBØX Order # | Description |
|---|---|
| 752-7202 | Mercury LP1502 Eight Reader/Thirty-Two Input/Twenty-Eight Output System w/ Managed Lock Power and Power Management for Eight Doors |