Skip to main content

BluCHIP 1501-4R/12I/10O-E2ML (752-3100)

Mercury EP1501 Four Reader/ Twelve Input/ Ten Output System w/ Managed Lock Power for Four Doors

The BluCHIP 1501-4R/12I/10O-E2ML is a unified Four Reader/ Twelve Input/Ten Output System w/ Managed Lock Power for Four Doors. The kit is configured with space to add backup battery and utilizes an FPO power supply to generate 24VDC and a B100 to generate 12VDC. It includes a Mercury EP1501, Mercury MR50, and a Mercury MR52 board, a locking four door enclosure with tamper, power supply and wiring speed kit. Local managed lock power, power monitor and control is included. Remote management and reporting of power supply and battery health are available through BluSKY Power Diagnostics.

System Features

FPO offline power supply

  1. 120 or 230 VAC input
  2. 12 and 24 VDC outputs
  3. On board Fire Alarm Interface
  4. Continuous and resettable DC

Distributed output module

  1. Four, controlled fused at 3A each
  2. Eight, auxiliary Class II P limited at 2.5A each

Expansion options

  1. Increased power, multiple voltages
  2. Additional distribution outputs
  3. Power management

Enclosure Features

Labor saving design

  1. Unified power and security in one enclosure
  2. Pre-wired power section
  3. Removeable backplate simplifies installs
  4. Speed kit is included for power and data wiring

Additional benefits

  1. Wire management room
  2. 4.5” enclosure depth fits battery set
  3. Tamper switch, lock, dual key set standard
  4. Mounting hardware for access boards included


Input Power:
  1. Input 120/230VAC 50/60Hz | 200 Watts
  2. Overload and short circuit protection
  3. Over temperature protection
  4. Polarized AC power supply disconnect
Output Power:
  1. 75W Total Output Power | 12VDC/6A or 24VDC/3A
  2. 5-18VDC @ 4A Max. | FPO Board Outputs: Continuous (DC1), Resettable (DC2)
  3. 4 Lock Outputs, 8 Auxiliary Outputs, Class 2 PL @ 2.5A each
  4. 120mV Output Voltage Ripple | System Efficiency: 85% | System BTU Rating: 33 BTU/Hr
Battery Charging:
  1. Independent built-in 1A (FPO75) Charger for sealed leadacid or gel type batteries
  2. Microprocessor dual rate charging of 12 or 24V battery sets
  3. Automatic switchover to standby battery when AC fails
  4. Zero voltage drop when switched over to battery backup
Regulatory Compliance:
  1. UL294, UL603, UL864, UL1076, UL1481, UL2044, UL2572, ULC S318, ULC S319, ULC S527, CSA C22.2 #107.1, FCC Part 15, CSFM Approved
Access Panel:
  1. (1) EP1501, (1) MR50, (1) MR52
    1. 4 Readers | 12 Inputs | 10 Outputs
Size and Weight:
  1. 20.00”H x 16.00”W x 4.50”D | 28 lbs.

Recommended board layout

Kit Includes

MFG Part # BluBØX Order # QTY Description
EP1501 120-1000 1 Mercury EP1501: One door DB controller Ethernet PoE/12V
MR50 120-2300 1 Mercury MR50: One door controller 12/24VDC
MR52 120-2500 1 Mercury MR52: Two door controller & auxiliary I/O 12/24VDC
E2M-SK-3T 577-3035 1 BluBØX E2M-SK-3T Speed Kit: Three board precut and harnessed power and data wiring kit
EP1501-MR50 640-1400 1 BluBØX EP1501-MR50 Bracket
FPO75-B100C4PD8PE2M 670-1421 1 LifeSafety Power: Four door power supply w/ power distribution and management, includes enclosure

Ordering Information

BluBØX Order # Description
752-3100 Mercury EP1501 Four Reader/Twelve Input/Ten Output System w/ Managed Lock Power for Four Doors

Additional Resources

  • Was this article helpful?