BluCHIP 1502-EMRC-PM2 (753-1100)

Mercury 1502-EMRC-PM2 Elevator Systems Controller for 1 to 8 Cars

The BluCHIP 1502-EMRC-PM2 is a Relay Elevator Systems Controller that supports 1 to 8 Cars with optional Floor ID. It can support Remote Power Management for 1 additional enclosure PS. The kit is configured with space to add backup battery and
utilizes an FPO power supply to generate 12 or 24VDC. It includes a Mercury EP1502 and a Mercury MUX8 board, a locking four door enclosure with tamper, power supply and wiring speed kit. Managed lock power is included. The SIO’s, their enclosures, and
power must be ordered separately. Remote management and reporting of power supply and battery health are available through BluSKY Power Diagnostics.

System Features

FPO offline power supply

1. 120 or 230 VAC input
2. 12 and 24 VDC outputs
3. On board Fire Alarm Interface
4. Continuous and resettable DC

Distributed output module

1. Four, controlled fused at 3A each
2. Eight, auxiliary Class II P limited at 2.5A each

Expansion options

1. Increased power, multiple voltages
2. Additional distribution outputs
3. Power Management

Enclosure Features

Labor saving design

1. Unified power and security in one enclosure
2. Pre-wired power section
3. Removable backplate simplifies installs
4. Speed kit is included for power and data wiring

Additional benefits

1. Wire management room
2. 4.5” enclosure depth fits battery set
3. Tamper switch, lock, dual key set standard
4. Mounting hardware for access boards included