Subject: Blue Sky runoff test at OSC on 11/6/2015
From: "Wang, Wenli BIS" <[email-masked]>
To: Simon Goldshmid <[email-masked]>
Cc: "Mahoney, Sally BIS" <[email-masked]>
Date: Thu, 12 Nov 2015 17:20:10 -0500

Hi Simon,

Thanks for coming to Otis Server Center to conduct Compass Security Integration Runoff test.  In general, it was a good test, and I am glad that your system implemented all features except CIM, with solid performance.

The follow summarized the test results:
   1.       Standard interface testing, include
         a.       Otis DES and local DEC configuration, and passed all test cases.
         b.      DEC operation mode setup, and passed all test cases.
         c.       PIN code and Audit Record support, and pass the all test cases except enable/disable Audit record.  This is not critical if your system can enable audit record automatically.
         d.      Special feature settings (TD bits), and passed all test cases.  Note: special features associated with TD Bits are configurable from Elevator system.  For example, TD08 = vertigo by default, but it could be configured as different TD bit.
         e.      Multiple server group support – passed all test cases.
         f.        DER and global DECs – configuration of DER is not explicitly from UI, but automatically when configure global DECs.  This is ok when DER servers use the default IP addresses of 10 and 20 (most cases).  However, there are some special cases when DER servers will use different IP addresses, such as 30 & 40.
         g.       System recovery from communication error – passed.
         h.      System recovery from compass server failover – passed.
         i.         The following interface/features were not tested:
                                                               i.      V1 interface – not support.
                                                             ii.      CIM segment– not support.

   2.       Card data handling for ICD v3 support.
         a.       Receive and process security card data from Otis reader – passed.   We tested with a standard 26 bit HID Prox card.

   3.       Tested the system with both Otis internal readers and BluB0x external readers on one compass system – passed.

Please feel free to provide your input/feedback.

Thanks,

Wenli Wang
Software Engineering Group
Otis Service Center
212 West Newberry Road, Bloomfield CT 06002
Phone 860.286.4421   Cell 310.739.5966
[email-masked]<mailto:[email-masked]>

This message may contain confidential and/or privileged information of Otis Elevator Company, a part of UTC Building & Industrial Systems, a unit of United Technologies Corp. and its affiliated companies.  If you are not the intended recipient please 1) do not disclose, copy, distribute or use this information, 2) advise the sender by return e-mail and 3) delete all copies from your computer.  Your cooperation is greatly appreciated.

This e-mail may also contain or have attached to it information or technology the export or re-export of which is restricted by U.S. laws and regulations. By viewing this e-mail and any attachments, the recipient agrees to the following: (i) the recipient’s use of the contents of this e-mail and any attachments shall comply with all applicable laws, rules and regulations, including, without limitation, U.S. international trade laws and regulations, and (ii) the recipient may not transfer or otherwise export or re-export any information or technology contained in this e-mail or any attachment except in full compliance with the export controls administered by the U.S. and other countries and any applicable import and use restrictions