Mercury M5-COM

 Printer Friendly Version

M5-COM is a Mercury device for replacement of the Casi Power and Communications controller board. As with the entire Mercury M5 Bridge family of controllers, the M5-COM is built with a matching form factor to the Casi Micro5 line of access control hardware allowing a fast “screwdriverless” change over and easy migration of a Casi client infrastructure to any Authentic Mercury software partner. While the Casi Power/ Communications board is required in each Casi enclosure, this is not the case with the Mercury M5-COM. The M5-COM provides RS485 communications to support other downstream Mercury bridged M5 enclosures. Each downstream bridged enclosure need only a M5-COM for complete Mercury functionality. (Up to 8 M5-COM’s can be supported by one M5-IC)

1. Promotes the chaining of multiple M5 enclosures
2. Supports Authentic Mercury controller

Specifications

The M5-COM is for use in low voltage, Class 2 Circuits only.

1. Not applicable, power is passed through and supplies power to the M5 enclosure back plane

1. 8 Form-C, 2 A @ 30 VAC/DC, resistive
2. 8 Form-A, 2 A @ 30 VAC/DC, resistive

1. 2-Wire RS-485 at: 9600, 19200, 38400, or 115200 bps, asynchronous, passed through to the back plane

1. 1 twisted pair, 18 AWG RS-485: 24 AWG, 4,000 ft (1,200m) maximum, shielded twisted pair, 120 ohm impedance

1. W 3.5 in (88.9 mm) • L 10.25 in (260.35 mm) • H 0.6 in (15.24 mm) Weight (w/o connectors): 3.4 oz. (96.5 g) nominal

1. Storage -55 °C to +85 °C
2. Operating 0 °C to +50 °C

1. 5 to 95 % RHNC

Standards:

1. UL 294 Recognized
2. CE Compliant
3. RoHS

Size and Weight:

1. 0.6”H x 3.4”W x 10.25”L | 3.4 oz. (w/o connectors)