Skip to main content
BluINFO

BluCHIP 2500-2R/8I/6O-E2M (750-1600)

Mercury EP2500 Two Reader/ Eight Input/ Four Output System for Four Doors

The BluCHIP 2500-2R/8I/4O-E2M is a unified Two Reader/Eight Input/Four Output System for Four Doors and expansion space to support two additional readers. The kit is configured with space to add backup battery and utilizes an FPO power supply to generate 12 or 24VDC. It includes a Mercury EP2500 board, a locking four door enclosure with tamper, power supply and wiring speed kit. It is expandable to four readers with one Mercury MR52 board. Remote management and reporting of power supply and battery health are available through BluSKY Power Diagnostics.


System Features

FPO offline power supply

  1. 120 or 230 VAC input
  2. 12 and 24 VDC outputs
  3. On board Fire Alarm Interface
  4. Continuous and resettable DC

Distributed output module

  1. Four, controlled fused at 3A each
  2. Eight, auxiliary Class II P limited at 2.5A each

Expansion options

  1. Increased power, multiple voltages
  2. Additional distribution outputs
  3. Power management

Enclosure Features

Labor saving design

  1. Unified power and security in one enclosure
  2. Pre-wired power section
  3. Removeable backplate simplifies installs
  4. Speed kit is included for power and data wiring

Additional benefits

  1. Wire management room
  2. 4.5” enclosure depth fits battery set
  3. Tamper switch, lock, dual key set standard
  4. Mounting hardware for access boards included

Specifications

Input Power:
  1. Input 120/230VAC 50/60Hz | 100 Watts
  2. Overload and short circuit protection
  3. Over temperature protection
  4. Polarized AC power supply disconnect
Output Power:
  1. 75W Total Output Power | 12VDC/6A or 24VDC/3A
  2. 5-18VDC @ 4A Max. | FPO Board Outputs: Continuous (DC1), Resettable (DC2)
  3. 120mV Output Voltage Ripple | System Efficiency: 85% | System BTU Rating: 33 BTU/Hr
Battery Charging:
  1. Independent built-in 1A (FPO75) Charger for sealed leadacid or gel type batteries
  2. Microprocessor dual rate charging of 12 or 24V battery sets
  3. Automatic switchover to standby battery when AC fails
  4. Zero voltage drop when switched over to battery backup
Regulatory Compliance:
  1. UL294, UL603, UL864, UL1076, UL1481, UL2044, UL2572, ULC S318, ULC S319, ULC S527, CSA C22.2 #107.1, FCC Part 15, CSFM Approved
Access Panel:
  1. (1) EP2500
    1. 2 Readers | 8 Inputs | 4 Outputs
Size and Weight:
  1. 20.00”H x 16.00”W x 4.50”D | 27 lbs.

Recommended board layout
752-5000_labels.jpg

Kit Includes

MFG Part # BluBØX Order # QTY Description
EP2500 120-1200 1 Mercury EP2500: Two door DB controller Ethernet 12/24VDC Auxiliary I/O
E2M-SK-2 577-3000 1 BluBØX E2M-SK-2 Speed Kit: Two board precut DC power and RS485 wiring kit
FPO75-E2M 670-1320 1 LifeSafety Power: single voltage power supply, includes enclosure

Expansion Options

MFG Part # BluBØX Order # QTY Description
MR52 120-2500 1 Mercury MR52: Two door controller & auxiliary I/O 12/24VDC

Ordering Information

BluBØX Order # Description
750-1600 Mercury EP2500 Two Reader/Eight Input/Four Output System for Four Doors

Additional Resources

 

 

  • Was this article helpful?