Skip to main content
BluINFO

BluCHIP 1502-EMRC-Boards Only (753-1000)

MR16In

Mercury 1502-EMRC Elevator Systems Controller for 1 to 8
Cars- Board Only

The BluCHIP 1502-EMRC is a Relay Elevator System Controller
board for 1 to 8 cars and up to 32 total SIOs. Supports Optional Floor ID. It includes a Mercury EP1502 controller and a Mercury MUX8 board. Requires two open board locations in an E4M1 SIO enclosure. The SIO’s, their enclosures, and power must be ordered separately.

                                       Elevator System Controller

System Features

FPO offline power supply

  1. 120 or 230 VAC input
  2. 12 and 24 VDC outputs
  3. On board Fire Alarm Interface
  4. Continuous and resettable DC

Distributed output module

  1. Four, controlled fused at 3A each
  2. Eight, auxiliary Class II P limited at 2.5A each

Expansion options

  1. Increased power, multiple voltages
  2. Additional distribution outputs
  3. Power Management

Specifications

Input Power:
  1. Input 120/230VAC 50/60Hz | 100 Watts
  2. Overload and short circuit protection
  3. Overload temperature protection
  4. Polarized AC power supply disconnect

Output Power:

  1. 75W Total Output Power | 12VDC/6A or 24VDC/3A
  2. FPO Board Outputs: Continuous (DC1), Resettable (DC2)
  3. 120mV Output Voltage Ripple | System Efficiency: 85% | System BTU Rating: 33 BTU/Hr
Access Panel:
  1. (1) EP1502, (1) MUX8
  2. 2 Reader | 16 Inputs | 4 Outputs
Size and Weight:

Requires two open board locations in an E4M1 SIO enclosure.

 Elevator System Controller

Kit Includes

MFG Part # BluBØX Order # QTY Description
EP1502 120-1100 1 Mercury EP1502: Two Door DB Controller Ethernet 12/24VDC Auxiliary I/O
MUX8 120-2600 1 Mercury MUX8: 8 Channel RS485 for Star
Configuration
E2M-SK-2 577-3000 1 BluBØX E2M-SK-2 Speed Kit: Two board precut DC power and RS485 wiring kit

Ordering Information

BluBØX Order # Description
753-1000 Mercury 1502-EMRC Elevator Systems Controller for 1 to 4 Cars - Board Only
  • Was this article helpful?